3D printing.
Upload, quote,
print, ship.
Brackets, covers, enclosures and replacement parts for trade and industry. Printed in Townsville, in the same workshop that engraves our labels.
Or call Josh on 0432 736 559
- ASA, PETG and PLA
- STL, OBJ, 3MF files, STEP by quote
- Up to 350 x 350 x 350 mm
- No minimum quantity
- Prints from $15
- Ships Australia-wide
Materials
Parts in the sun or in a vehicle want ASA or PETG. Tell the quote tool where the part will live and it points you at the right one.
ASA
Outdoors, sun and vehicles
Made for parts that live outside. It does not chalk in UV and holds its shape to about 100°C, so it suits brackets, covers and anything in a car or engine bay.
In stock in black.
PETG
Outdoors and heat to about 80°C
Tougher than PLA and handles weather well. A good all-rounder for enclosures and mounts. For years of direct sun, ASA lasts longest.
In stock in white.
PLA
Indoors and prototypes
Fine for indoor parts, test fits and prototypes. It softens around 60°C and breaks down in UV, so keep it out of the sun and out of vehicles.
In stock in black and white.
Other colours are special order.
Upload a file, or send a photo
Upload a file
Instant price. STL, OBJ, or 3MF files, up to 350 mm in any direction.
No file? Send a photo insteadTap to choose your fileDrag and drop your file, or click to browse
STL · OBJ · 3MF, up to 100 MB. STEP by quote
What we print
Equipment covers and enclosures
Custom enclosures for electronics, switchgear covers and panel inserts.
Mounting brackets
Brackets, clips and mounts for cable management, equipment fitting and retrofit work. Single parts welcome.
Replacement parts
Send a CAD file or measurements for parts that are out of production: knobs, covers, fittings, anything FDM can make.
Solar installer parts
EFS covers, equipment shields and custom installer hardware, from a single part to an ongoing run.
Prototypes and one-offs
Single prototypes for designers and engineers. No minimum quantity, prints from $15.
No 3D file?
Send a photo, a sketch or the measurements and we quote it within 24 hours. Or call Josh on 0432 736 559.
Send a photoQuestions
How much does 3D printing cost in Australia?
At RBZ 3D pricing is calculated instantly from your model: material weight plus machine time, and prints start from $15. A palm-sized functional part in PLA typically lands between $20 and $50. Upload your STL, OBJ, or 3MF file to see the exact price before you pay. No email or signup required.
What file formats can I upload for a 3D printing quote?
STL, OBJ, and 3MF files up to 100MB, STEP by quote. The model is measured in your browser and priced on the spot. If you only have a drawing, sketch, or photo, use the Quick Quote form instead and we will quote it within 24 hours.
What materials do you print in?
From stock: ASA in black; PETG in white; PLA in black and white. Other colours are special order, ordered in for your job. PLA suits indoor parts and prototypes. PETG handles heat to about 80°C and is tougher. ASA is the pick for outdoor, UV-exposed, or vehicle parts. It will not chalk in the Queensland sun or soften in a hot car. The quote tool recommends a material once you tell it where the part will live.
What is the maximum print size?
Up to 350mm in any direction as a single piece. Larger parts can often be printed in sections and joined. Send the model through Quick Quote and we will advise.
How long does 3D printing take?
Production typically starts the same day and orders ship the same week with tracking. Townsville and North Queensland orders usually arrive within 1-3 business days of dispatch, interstate within 3-7.
Can I order just one part?
Yes. No minimum quantity. Prints start from $15. Single prototypes, one-off replacement parts, and small repair pieces are welcome.
Same workshop that engraves your switchboard labels.
Engraved labels