Australia-wide delivery · Made by an electrician · 1–3 day production
Engraved labels
electricians
actually trust.
Design it now · see your price
In-stock colours shown — more in the full designer.
Custom engraved electrical labels are switchboard, isolator, and equipment ID labels laser-cut from two-layer engraving laminate (traffolyte) — the standard material for permanent electrical labelling under AS/NZS 3000.
Switchboard labels, isolator tags, control panel plates and warning signs in durable engraving laminate. Designed by a qualified sparky for what actually gets installed on site.
Order today — Express by Tue 18 Aug · Priority Air by Mon 17 Aug
- Customer rating
- 5.0 from 15 reviews
- Avg $3.38
- Avg $3.38 / label
- Made by a
- Made by a qualified sparky
- 1–3 day
- 1–3 day production
- No minimum
- No minimum order
- Australia-wide
- Australia-wide tracked shipping
Real prices
See the price before you commit.
No quote, no waiting. Common sizes priced per label below — cheaper per unit in bulk, and there’s no minimum order.
Build yours & see your price40 × 12 mm
Circuit ID label
$2.69
per label
Switchboard circuit labels
100 × 50 mm
Main switch label
$6.81
per label
The standard switchboard size
150 × 50 mm
Warning / PV sign
$9.09
per label
Solar & safety signage
Fastest path
Photo or list? Send it — priced in 24h.
Snap the switchboard, attach the schedule, or upload a drawing — Josh prices it within 24 hours.
Order today →
Standard — FREE over $40 / $8.50
Fri 14 Aug – Fri 21 Aug
Express — Express $15
Thu 13 Aug – Tue 18 Aug
Priority Air — Priority Air $35
Thu 13 Aug – Mon 17 Aug
What customers are saying
See all →“As soon as I had put my order in, Josh was on the phone to me to adjust a few things to make sure it was 100% right. Couldn’t ask for better service and transparency from designing all the way to picking up the labels.”
“Great service and communication”
“Hi recently had solar panels installed, but the installer did a messy job on my switchboard. The moved all the switches around, but didn't move any of the existing labels, and the new labels were just label maker and the terminology was non complaint (failed and Office of the Technical Regulator audit). I took it on myself to get professionally laser cut labels to replace the dodgy label maker/hand written and non-compliant language. RBZ3D was easy to use to make all the labels I need, shipped quick enough, and now the labels look so much better. Would definitely recommend and use again.”
“Treff labels supplied as requested, great job thank you”
Real labels · real jobs
Every label here was made for a working sparky.
Switchboards, solar installs, control panels, plant rooms. Click any photo to enlarge.
The material
Traffolyte. The Australian standard.
Two-layer engraving laminate — a thin colour cap bonded to a contrasting core. Laser-cut text exposes the core, producing labels that don't fade, peel, smudge, or wear off. UV stable. Heat resistant. The material every Australian electrical inspector expects to see.
RBZ 3D engraves custom electrical labels to order in Townsville, Queensland — designed online with instant per-label pricing, engraved by a licensed electrician within 1–3 business days, with no minimum order and tracked shipping Australia-wide.
- ·Permanent engraved text — won't fade or rub off
- ·UV stable for outdoor switchboards and solar installs
- ·Self-adhesive backing, mounting holes, or wire-through tags
- ·Accepted by every Australian electrical inspector
Available colour combinations
Black/White
General circuit ID
White/Black
Valve tags, equipment ID
Red/White
Main switch, warnings
Yellow/Black
Multiple supplies, PV
Blue/White
Mandatory action
Green/White
Safe condition, exits
Need a sample pack first? Order a swatch ring — free, just cover the postage.
What we make
Anything you'd engrave for a working install.
Switchboard labels
Circuit identification, RCD labels, main switch labels, and board schedules — residential, commercial, industrial.
Solar installation labels
DC and AC isolator labels, shutdown procedures, PV array warnings, multiple-supplies tags. Everything CER and CEC require.
Control panel labels
Pushbutton plates, selector switches, motor starters, PLC I/O, and emergency stops with engraved cutouts.
Safety & warning labels
Danger high-voltage, isolate-before-work, lockout tags, restricted access. Permanent engraving meets WHS durability requirements.
Replacement labels
Send a photo of a damaged or faded label and we'll match the size, text, and layout to produce an exact replacement.
Design online
Type your text. See the price. Ship it.
Built for trades — pick a size, type the text, choose colour, get an instant price. No graphic designer needed. The Advanced Designer adds shapes, warning icons, mounting holes and cutouts when you need them.
Related products
More from the workshop.
Electrical label supplier
Sourcing a supplier rather than one product? Range, specs, trade accounts and how ordering works.
Traffolyte signs & tags
The material itself — colour combinations, valve tags, signage at any size.
Cable tags Australia
Engraved cable identification — switchboard, sub-mains, motor feeds, solar PV.
Circuit breaker labels
Per-breaker switchboard labels meeting AS/NZS 3000 clause 2.8.
Bulk industrial engraving
Volume runs for switchboard manufacturers, miners, contractors. Account terms.
Queensland service
Local QLD-based electrical label engraving with same-week dispatch statewide.
AS/NZS 3000 labelling guide
Plain-English compliance reference — what counts, what doesn't.
Standards framing
Straight about what a label can claim.
AS/NZS 3000 clause 2.8 asks that switchboard labelling be permanent, legible for the life of the installation, and clear about which circuit and equipment each label identifies. Engraved traffolyte meets the durability and permanence requirements of that clause, because the text is cut into the material rather than printed onto it — there is no ink to fade and no film to lift.
Solar and battery — the one place testing is required
Solar goes further than AS/NZS 3000. The Clean Energy Council’s Advice on Labelling (Version 2, June 2023) requires any label exposed to direct sunlight to be UV resistant, demonstrated by passing IEC 60068-2-5:2018 — a 720-hour accelerated weathering test.
Section 3.1.1 of that document carries an exception: it does not apply to markings that are physically engraved, embossed or etched with durable markings. Engraving is exempt because the marking is the material — there is no printed surface to fade.
The practical difference: a printed or vinyl label in direct sun needs that test report to show it meets the requirement. An engraved one doesn’t. If your supplier can’t produce the report, you can’t demonstrate the label complies.
Read the full breakdown → CER photo evidence and the CEC labelling guideWhat we will not tell you
- ·That the material is “certified” or “approved”. There is no certification scheme for engraving laminate and no inspector approval scheme for labels. A supplier using those words is selling you a word.
- ·That a label makes an installation compliant. Compliance is the installation, the documentation and the person who signed it — a label is one durable part of that.
- ·What your board should say. Josh holds an electrical licence and is happy to talk it through, but the wording call belongs to whoever is responsible for the job.
Common questions
Quick answers.
What's the minimum order?
There's no minimum — order as few as one label using our Basic or Advanced Designer.
How long does production take?
Most orders are produced within 1-3 business days and shipped Australia-wide.
Are labels suitable for outdoor use?
Yes. Our engraving laminate is UV stable and weather resistant for long-term outdoor installations.
Can I include warning symbols?
Yes. The Advanced Designer includes a library of warning symbols and electrical icons.
Ready to ship
One label or a full board.
Same engraving, same week. Type your text or send the schedule — we’ll handle the rest.
or call Josh directly on 0432 736 559