Adelaide metro · Port Adelaide · Elizabeth · Mount Barker · Whyalla
Switchboard labels
for
Adelaide boards.
A switchboard label identifies a circuit, main switch, or supply on a board — AS/NZS 3000 clause 2.8 requires that identification to be permanent and legible for the life of the installation. RBZ 3D engraves switchboard label sets to order in Townsville, Queensland and delivers them to Adelaide and greater South Australia in 3–6 business days after 1–3 business days production.
Circuit identification, main switch and isolator labels, RCD tags, board schedules and legend cards — engraved by a licensed electrician, priced online, and shipped tracked to Adelaide in 3–6 business days.
Order today — Express by Tue 18 Aug · Priority Air by Mon 17 Aug
- Customer rating
- 5.0 from 15 reviews
- Avg $3.38
- Avg $3.38 / label
- Made by a
- Made by a licensed sparky
- 3–6
- 3–6 days to Adelaide
- 1–3 day
- 1–3 day production
- No minimum
- No minimum order
Real prices
See the price before you commit.
No quote, no waiting. Common sizes priced per label below — cheaper per unit in bulk, and there’s no minimum order.
Build yours & see your price40 × 12 mm
Circuit ID label
$2.69
per label
Switchboard circuit labels
100 × 50 mm
Main switch label
$6.81
per label
The standard switchboard size
150 × 50 mm
Warning / PV sign
$9.09
per label
Solar & safety signage
Order today →
Standard — FREE over $40 / $8.50
Fri 14 Aug – Fri 21 Aug
Express — Express $15
Thu 13 Aug – Tue 18 Aug
Priority Air — Priority Air $35
Thu 13 Aug – Mon 17 Aug
Board work in Adelaide
Battery and inverter boards, defence-sector panels, and winery switchrooms.
South Australia puts more generation behind the meter than any comparable market, and that lands on the board as labelling. Inverter supply identification at the main switch, multiple supplies warnings, battery isolation identification — Adelaide boards routinely carry supply-side labels that a board of the same age interstate would not, and the retrofit sets are a steady part of what we engrave for SA.
The rest is manufacturing and process. Panels for the northern corridor and the defence supply chain need legend plates and equipment identification engraved to a documented format, and the winery and food plants down south need switchroom boards labelled well enough that a relief operator can find the right pump circuit in vintage without asking anyone.
See the full switchboard label range →What customers are saying
See all →“As soon as I had put my order in, Josh was on the phone to me to adjust a few things to make sure it was 100% right. Couldn’t ask for better service and transparency from designing all the way to picking up the labels.”
“Great service and communication”
“Hi recently had solar panels installed, but the installer did a messy job on my switchboard. The moved all the switches around, but didn't move any of the existing labels, and the new labels were just label maker and the terminology was non complaint (failed and Office of the Technical Regulator audit). I took it on myself to get professionally laser cut labels to replace the dodgy label maker/hand written and non-compliant language. RBZ3D was easy to use to make all the labels I need, shipped quick enough, and now the labels look so much better. Would definitely recommend and use again.”
“Treff labels supplied as requested, great job thank you”
On the escutcheon
The boards we label in Adelaide.
Every set is engraved to your schedule and sorted so it can be fitted in order — one board or a whole site.
Inverter & battery supply labels
Main switch inverter supply, multiple supplies warnings, and battery isolation identification for the retrofit sets SA boards need once storage goes in.
Winery & cellar switchrooms
Pump, press, refrigeration, and crusher circuit identification on switchroom boards — engraved text is unaffected by the washdown that lifts printed labels off a door.
Defence & manufacturing panels
Control panel legend plates and board identification engraved to a documented format for the northern corridor manufacturing and defence supply chain.
Commercial DB schedules
Circuit schedules, main switch labels, and RCD identification for Adelaide metro fit-outs, from single boards to a building's worth.
Legend cards & door schedules
The whole circuit list as one engraved legend card for the inside of the door — an alternative to individual labels where the escutcheon has no room.
Real boards · real labels
What ends up on the board.
Circuit IDs, board tags, isolator labels, door signage, legend plates. Click any photo to enlarge.
From schedule to escutcheon
Send the schedule. Fit the labels.
Type the schedule, confirm the artwork, and the set is engraved and on its way to Adelaide — one tracked consignment, sorted by board.
1 · Schedule
One row per label
Paste the circuit list into the bulk tool, or send a photo of the board and we transcribe it.
2 · Production
1–3 business days
Engraved to order in Townsville, QLD once the artwork is confirmed.
3 · Tracked post
3–6 business days
typically, to Adelaide after dispatch — tracking number the moment it leaves the bench. Australia Post timeframes are indicative, not guaranteed.
Or · Express
2–3 business days
typically, when a handover, inspection, or shutdown date is fixed. Still Australia Post's network, so it can run long in peak periods.
Or · Priority Air
1–2 business days
StarTrack Premium — the most consistent lane we run to Adelaide. It is the one we reach for when the board is waiting on the labels, though no courier can promise a date.
Standards framing
Straight about what a label can claim.
AS/NZS 3000 clause 2.8 asks that switchboard labelling be permanent, legible for the life of the installation, and clear about which circuit and equipment each label identifies. Engraved traffolyte meets the durability and permanence requirements of that clause, because the text is cut into the material rather than printed onto it — there is no ink to fade and no film to lift.
Solar and battery — the one place testing is required
Solar goes further than AS/NZS 3000. The Clean Energy Council’s Advice on Labelling (Version 2, June 2023) requires any label exposed to direct sunlight to be UV resistant, demonstrated by passing IEC 60068-2-5:2018 — a 720-hour accelerated weathering test.
Section 3.1.1 of that document carries an exception: it does not apply to markings that are physically engraved, embossed or etched with durable markings. Engraving is exempt because the marking is the material — there is no printed surface to fade.
The practical difference: a printed or vinyl label in direct sun needs that test report to show it meets the requirement. An engraved one doesn’t. If your supplier can’t produce the report, you can’t demonstrate the label complies.
Read the full breakdown → CER photo evidence and the CEC labelling guideWhat we will not tell you
- ·That the material is “certified” or “approved”. There is no certification scheme for engraving laminate and no inspector approval scheme for labels. A supplier using those words is selling you a word.
- ·That a label makes an installation compliant. Compliance is the installation, the documentation and the person who signed it — a label is one durable part of that.
- ·What your board should say. Josh holds an electrical licence and is happy to talk it through, but the wording call belongs to whoever is responsible for the job.
Common questions
Quick answers.
What does a board need once a battery system is added?
The board generally picks up supply-side identification: an inverter supply label at the main switch, a multiple supplies warning, and identification for the battery isolation point, alongside whatever the installer's shutdown procedure calls out. Send the list or a photo of the board and the set comes back priced before anything is engraved.
Can you engrave a whole schedule as one legend card?
Yes. Where there is no room on the escutcheon for individual circuit labels, the full schedule goes on a single engraved legend card for the inside of the door — one plate, one price, and the text is engraved into the material rather than printed onto a card that yellows.
What does AS/NZS 3000 require on a Adelaide switchboard?
Clause 2.8 of the Wiring Rules deals with identification: switchboard labelling has to be permanent, legible for the life of the installation, and clear about which circuit or equipment each label refers to. Engraved traffolyte satisfies all three by construction — the text is cut into the material rather than printed onto it, so there is nothing to fade, peel, or rub away.
How do I send a whole board schedule?
Use the bulk tool in the Label Designer — one row per label, paste or type the schedule, and every label is priced as you go. If you would rather not type it, send a photo of the board or a copy of the schedule through Quick Quote and it comes back priced within one business day.
Who makes them, and where?
Josh, a licensed electrician, on one CO2 laser in Townsville, Queensland. Every Adelaide order is engraved to order here, checked, and shipped tracked — no outsourcing, no reselling somebody else's labels.
Adelaide board to label?
Send the board schedule.
A photo of the open board, a circuit schedule, or a typed list — send it through and it comes back priced within one business day.
Ready when the board is
Label the Adelaide board properly.
One replacement circuit label or every board on the site — same engraving, same week.
or call Josh directly on 0432 736 559