Brisbane metro · Ipswich · Logan · Gold Coast · Sunshine Coast
Switchboard labels
for
Brisbane boards.
A switchboard label identifies a circuit, main switch, or supply on a board. RBZ 3D engraves switchboard label sets to order in Townsville, Queensland and delivers them to Brisbane and greater Queensland in 2–4 business days after 1–3 business days production.
Circuit identification, main switch and isolator labels, RCD tags, board schedules and legend cards, engraved by a licensed electrician, priced online, and shipped tracked to Brisbane in 2–4 business days.
Order today: Express by Fri 30 Oct · Priority Air by Thu 29 Oct
- Customer rating
- 5.0 from 24 reviews
- Avg $3.13
- Avg $3.13 / label inc GST
- Maker
- Made by a licensed sparky
- 2–4
- 2–4 days to Brisbane
- 1–3 day
- 1–3 day production
- No minimum
- No minimum order
Real prices
See the price before you commit.
No quote, no waiting. Common sizes priced per label below — cheaper per unit in bulk, and there’s no minimum order.
Build yours & see your price40 × 12 mm
Circuit ID label
$2.22
Each, inc GST
Switchboard circuit labels
100 × 50 mm
Main switch label
$7.61
Each, inc GST
The standard switchboard size
150 × 50 mm
Warning / PV sign
$10.59
Each, inc GST
Solar & safety signage
Order today →
Standard $8.50, free over $40
Tue 27 Oct to Wed 4 Nov
Express $15
Mon 26 Oct to Fri 30 Oct
Priority Air $35
Mon 26 Oct to Thu 29 Oct
Board work in Brisbane
Solar and battery boards, new-estate meter panels, and SEQ fit-outs.
Brisbane and the wider south-east generate more supply-side board labelling than anywhere else we ship to. Every solar or battery install adds labels the board did not have when it was built: multiple supplies warnings, inverter supply identification at the main switch, and a shutdown procedure on the door. That is a label set, not a single sticker, and it is the part most likely to be missing when the board is inspected.
Alongside that is straight commercial work: fit-out DB schedules through the CBD, Fortitude Valley, and the industrial corridors out to Ipswich. Brisbane is same-state freight from the Townsville workshop, so board sets land in 1–2 business days after dispatch rather than the week an interstate supplier needs.
See the full switchboard label range →What customers are saying
See all →“Hi recently had solar panels installed, but the installer did a messy job on my switchboard. The moved all the switches around, but didn't move any of the existing labels, and the new labels were just label maker and the terminology was non complaint (failed and Office of the Technical Regulator audit). I took it on myself to get professionally laser cut labels to replace the dodgy label maker/hand written and non-compliant language. RBZ3D was easy to use to make all the labels I need, shipped quick enough, and now the labels look so much better. Would definitely recommend and use again.”
On the escutcheon
The boards we label in Brisbane.
Every set is engraved to your schedule and sorted so it can be fitted in order, one board or a whole site.
Boards with solar or battery
Main switch grid supply and main switch inverter supply labels, multiple supplies warnings in yellow, and a shutdown procedure sign for the board door: the full set an inverter added to an existing board calls for.
Isolator identification
DC and AC isolator labels engraved in the colours your job calls for, legible enough to photograph for install evidence.
New-estate meter panels
Meter panel and board identification for volume residential work across Logan, Ipswich, and the northern corridor, repeat sets ordered per house or per stage.
Commercial fit-out schedules
Complete circuit schedules, main switch labels, and RCD identification for retail, hospitality, and office boards through Brisbane and the Gold and Sunshine Coasts.
Sub-board and DB naming
DB-01, MSB, sub-board and changeover references engraved as a matched set so every board in the building reads the same way.
Real boards · real labels
What ends up on the board.
Circuit IDs, board tags, isolator labels, door signage, legend plates. Click any photo to enlarge.
From schedule to escutcheon
Send the schedule. Fit the labels.
Type the schedule, confirm the artwork, and the set is engraved and on its way to Brisbane: one tracked consignment, sorted by board.
1 · Schedule
One row per label
Paste the circuit list into the bulk tool, or send a photo of the board and we transcribe it.
2 · Production
1–3 business days
Engraved to order in Townsville, QLD once the artwork is confirmed.
3 · Tracked post
2–4 business days
typically, to Brisbane after dispatch, tracking number the moment it leaves the bench. Australia Post timeframes are indicative, not guaranteed.
Or · Express
1–2 business days
typically, when a handover, inspection, or shutdown date is fixed. Still Australia Post's network, so it can run long in peak periods.
Or · Priority Air
1–2 business days
StarTrack Premium: the most consistent lane we run to Brisbane. It is the one we reach for when the board is waiting on the labels, though no courier can promise a date.
Standards framing
Straight about what a label can claim.
In its audits of the Solar Victoria heating and cooling program, Energy Safe Victoria lists circuit breakers not labelled to show what they supply as a common defect, under AS/NZS 3000:2018 clause 2.10.5.2. Its test is whether a person can “readily identify the equipment supplied and the corresponding circuit protective devices”. Engraved traffolyte has the text cut into the material rather than printed onto it. There is no ink to fade and no film to lift.
What we will not tell you
- ·That the material is “certified” or “approved”. None of the regulator pages we have read approves a label material. A supplier using those words should be able to show you the document.
- ·That a label makes an installation compliant. Compliance is the installation, the documentation and the person who signed it. A label is one durable part of that.
- ·What your board should say. Josh holds an electrical licence and is happy to talk it through, but the wording call belongs to whoever is responsible for the job.
Common questions
Quick answers.
What labels does a Brisbane board with solar added need?
The board typically gains supply-side identification it did not have when it was built: a main switch grid supply label, a main switch inverter supply label, a yellow multiple supplies warning, and a shutdown procedure for the door, plus DC and AC isolator labels at the isolators themselves. The designer has that set as a template so you can price it in one go.
How fast can switchboard labels reach a Brisbane site?
Production is 1–3 business days once the artwork is confirmed, then Brisbane is same-state freight, typically 2–4 business days on tracked post, and around 1–2 on express when the install date is fixed. Those are Australia Post's typical windows rather than a guarantee; Priority Air is the most consistent lane if the date cannot move.
What does AS/NZS 3000 require on a Brisbane switchboard?
Energy Safe Victoria's defect guidance names AS/NZS 3000:2018 clause 2.10.5.2: circuit breakers labelled to show what they supply. Its test is whether a person can readily identify the equipment supplied and the corresponding circuit protective devices. Engraved traffolyte has the text cut into the material rather than printed onto it. What the label says is the call of the person doing the job.
How do I send a whole board schedule?
Use the bulk tool in the Label Designer: one row per label, paste or type the schedule, and every label is priced as you go. If you would rather not type it, send a photo of the board or a copy of the schedule through Quick Quote and it comes back priced within one business day.
Who makes them, and where?
Josh, a licensed electrician, on one CO2 laser in Townsville, Queensland. Every Brisbane order is engraved to order here, checked, and shipped tracked. No outsourcing, no reselling somebody else's labels.
Brisbane board to label?
Send the board schedule.
A photo of the open board, a circuit schedule, or a typed list. Send it through and it comes back priced within one business day.
Ready when the board is
Label the Brisbane board properly.
One replacement circuit label or every board on the site, same engraving, same week.
or call Josh directly on 0432 736 559