Rockhampton · Gracemere · Yeppoon · Biloela · Central Queensland
Switchboard labels
for
Rockhampton boards.
A switchboard label identifies a circuit, main switch, or supply on a board — AS/NZS 3000 clause 2.8 requires that identification to be permanent and legible for the life of the installation. RBZ 3D engraves switchboard label sets to order in Townsville, Queensland and delivers them to Rockhampton and greater Queensland in 2–4 business days after 1–3 business days production.
Circuit identification, main switch and isolator labels, RCD tags, board schedules and legend cards — engraved by a licensed electrician, priced online, and shipped tracked to Rockhampton in 2–4 business days.
Order today — Express by Tue 18 Aug · Priority Air by Mon 17 Aug
- Customer rating
- 5.0 from 15 reviews
- Avg $3.38
- Avg $3.38 / label
- Made by a
- Made by a licensed sparky
- 2–4
- 2–4 days to Rockhampton
- 1–3 day
- 1–3 day production
- No minimum
- No minimum order
Real prices
See the price before you commit.
No quote, no waiting. Common sizes priced per label below — cheaper per unit in bulk, and there’s no minimum order.
Build yours & see your price40 × 12 mm
Circuit ID label
$2.69
per label
Switchboard circuit labels
100 × 50 mm
Main switch label
$6.81
per label
The standard switchboard size
150 × 50 mm
Warning / PV sign
$9.09
per label
Solar & safety signage
Order today →
Standard — FREE over $40 / $8.50
Fri 14 Aug – Fri 21 Aug
Express — Express $15
Thu 13 Aug – Tue 18 Aug
Priority Air — Priority Air $35
Thu 13 Aug – Mon 17 Aug
Board work in Rockhampton
Processing plant switchrooms, pump and irrigation boards, and CQ commercial.
Rockhampton's board labelling is dominated by washdown environments. Beef processing and cold-chain switchrooms get cleaned with caustics at a pressure that removes printed labels and, eventually, the adhesive under them. Engraved identification is the standard answer because the contrast is the material — there is no printed layer for the wash to attack.
Outside the plants it is agricultural and municipal infrastructure: pump control boards, irrigation and feedlot distribution, and bore and pivot boards spread across Central Queensland where a mislabelled circuit costs a drive rather than a walk. Same-state freight puts a board set in Rockhampton 1–2 business days after dispatch.
See the full switchboard label range →What customers are saying
See all →“As soon as I had put my order in, Josh was on the phone to me to adjust a few things to make sure it was 100% right. Couldn’t ask for better service and transparency from designing all the way to picking up the labels.”
“Great service and communication”
“Hi recently had solar panels installed, but the installer did a messy job on my switchboard. The moved all the switches around, but didn't move any of the existing labels, and the new labels were just label maker and the terminology was non complaint (failed and Office of the Technical Regulator audit). I took it on myself to get professionally laser cut labels to replace the dodgy label maker/hand written and non-compliant language. RBZ3D was easy to use to make all the labels I need, shipped quick enough, and now the labels look so much better. Would definitely recommend and use again.”
“Treff labels supplied as requested, great job thank you”
On the escutcheon
The boards we label in Rockhampton.
Every set is engraved to your schedule and sorted so it can be fitted in order — one board or a whole site.
Processing plant switchrooms
Line, chiller, and pump circuit identification for beef processing and cold-chain switchrooms — engraved text is unaffected by the caustic washdown that destroys printed labels.
Pump & irrigation control boards
Bore, pivot, and pump circuit identification for boards sitting out in the paddock, where the label has to still be readable the next season.
Workshop & fabrication boards
Machine circuit identification, isolator labels, and board ID tags for Rockhampton engineering and fabrication workshops.
Mining services site boards
Distribution board and workshop board identification for mine-services contractors working the Bowen Basin fringe out of Rockhampton and Gracemere.
Commercial DB schedules
Circuit schedules, main switch labels, and RCD identification for Rockhampton and Yeppoon commercial boards.
Real boards · real labels
What ends up on the board.
Circuit IDs, board tags, isolator labels, door signage, legend plates. Click any photo to enlarge.
From schedule to escutcheon
Send the schedule. Fit the labels.
Type the schedule, confirm the artwork, and the set is engraved and on its way to Rockhampton — one tracked consignment, sorted by board.
1 · Schedule
One row per label
Paste the circuit list into the bulk tool, or send a photo of the board and we transcribe it.
2 · Production
1–3 business days
Engraved to order in Townsville, QLD once the artwork is confirmed.
3 · Tracked post
2–4 business days
typically, to Rockhampton after dispatch — tracking number the moment it leaves the bench. Australia Post timeframes are indicative, not guaranteed.
Or · Express
1–2 business days
typically, when a handover, inspection, or shutdown date is fixed. Still Australia Post's network, so it can run long in peak periods.
Or · Priority Air
1–2 business days
StarTrack Premium — the most consistent lane we run to Rockhampton. It is the one we reach for when the board is waiting on the labels, though no courier can promise a date.
Standards framing
Straight about what a label can claim.
AS/NZS 3000 clause 2.8 asks that switchboard labelling be permanent, legible for the life of the installation, and clear about which circuit and equipment each label identifies. Engraved traffolyte meets the durability and permanence requirements of that clause, because the text is cut into the material rather than printed onto it — there is no ink to fade and no film to lift.
Solar and battery — the one place testing is required
Solar goes further than AS/NZS 3000. The Clean Energy Council’s Advice on Labelling (Version 2, June 2023) requires any label exposed to direct sunlight to be UV resistant, demonstrated by passing IEC 60068-2-5:2018 — a 720-hour accelerated weathering test.
Section 3.1.1 of that document carries an exception: it does not apply to markings that are physically engraved, embossed or etched with durable markings. Engraving is exempt because the marking is the material — there is no printed surface to fade.
The practical difference: a printed or vinyl label in direct sun needs that test report to show it meets the requirement. An engraved one doesn’t. If your supplier can’t produce the report, you can’t demonstrate the label complies.
Read the full breakdown → CER photo evidence and the CEC labelling guideWhat we will not tell you
- ·That the material is “certified” or “approved”. There is no certification scheme for engraving laminate and no inspector approval scheme for labels. A supplier using those words is selling you a word.
- ·That a label makes an installation compliant. Compliance is the installation, the documentation and the person who signed it — a label is one durable part of that.
- ·What your board should say. Josh holds an electrical licence and is happy to talk it through, but the wording call belongs to whoever is responsible for the job.
Common questions
Quick answers.
Do engraved board labels survive processing plant washdown?
Yes — that is the main reason plant switchrooms move to engraved identification. The text is cut into a two-layer laminate, so the contrast is structural rather than printed. Caustic cleaning and high-pressure washdown can dull the surface without ever taking the text off.
Can you label pump, bore, and pivot control boards?
Yes. Bore pump, pivot, and generator changeover circuit labels for rural distribution boards are regular work — send the circuit list, or a photo of the board with the breakers visible, and the set comes back sized to fit the existing escutcheon.
What does AS/NZS 3000 require on a Rockhampton switchboard?
Clause 2.8 of the Wiring Rules deals with identification: switchboard labelling has to be permanent, legible for the life of the installation, and clear about which circuit or equipment each label refers to. Engraved traffolyte satisfies all three by construction — the text is cut into the material rather than printed onto it, so there is nothing to fade, peel, or rub away.
How do I send a whole board schedule?
Use the bulk tool in the Label Designer — one row per label, paste or type the schedule, and every label is priced as you go. If you would rather not type it, send a photo of the board or a copy of the schedule through Quick Quote and it comes back priced within one business day.
Who makes them, and where?
Josh, a licensed electrician, on one CO2 laser in Townsville, Queensland. Every Rockhampton order is engraved to order here, checked, and shipped tracked — no outsourcing, no reselling somebody else's labels.
Rockhampton board to label?
Send the board schedule.
A photo of the open board, a circuit schedule, or a typed list — send it through and it comes back priced within one business day.
Ready when the board is
Label the Rockhampton board properly.
One replacement circuit label or every board on the site — same engraving, same week.
or call Josh directly on 0432 736 559