Melbourne metro · Geelong · Dandenong · Ballarat · Bendigo
Switchboard labels
for
Melbourne boards.
A switchboard label identifies a circuit, main switch, or supply on a board. RBZ 3D engraves switchboard label sets to order in Townsville, Queensland and delivers them to Melbourne and greater Victoria in 3–6 business days after 1–3 business days production.
Circuit identification, main switch and isolator labels, RCD tags, board schedules and legend cards, engraved by a licensed electrician, priced online, and shipped tracked to Melbourne in 3–6 business days.
Order today: Express by Fri 30 Oct · Priority Air by Thu 29 Oct
- Customer rating
- 5.0 from 24 reviews
- Avg $3.13
- Avg $3.13 / label inc GST
- Maker
- Made by a licensed sparky
- 3–6
- 3–6 days to Melbourne
- 1–3 day
- 1–3 day production
- No minimum
- No minimum order
Real prices
See the price before you commit.
No quote, no waiting. Common sizes priced per label below — cheaper per unit in bulk, and there’s no minimum order.
Build yours & see your price40 × 12 mm
Circuit ID label
$2.22
Each, inc GST
Switchboard circuit labels
100 × 50 mm
Main switch label
$7.61
Each, inc GST
The standard switchboard size
150 × 50 mm
Warning / PV sign
$10.59
Each, inc GST
Solar & safety signage
Order today →
Standard $8.50, free over $40
Tue 27 Oct to Wed 4 Nov
Express $15
Mon 26 Oct to Fri 30 Oct
Priority Air $35
Mon 26 Oct to Thu 29 Oct
Board work in Melbourne
Motor control centres, plant switchrooms, and commercial DBs.
Melbourne's switchboard work splits between the manufacturing belt and the commercial towers. On the industrial side it is motor control centres and plant switchrooms: bucket and starter identification, isolator labels, and legend plates that tell an operator which line the starter feeds rather than just which breaker it is. That labelling has to be readable from the aisle, not from arm's length.
On the commercial side it is distribution board schedules for fit-outs and retrofits. A lot of Melbourne stock is older, so escutcheon cutouts and label positions are rarely a standard size. Send the dimensions off the old label or the cutout and we engrave to that, rather than making you drill new holes to suit a stock label.
See the full switchboard label range →What customers are saying
See all →“Hi recently had solar panels installed, but the installer did a messy job on my switchboard. The moved all the switches around, but didn't move any of the existing labels, and the new labels were just label maker and the terminology was non complaint (failed and Office of the Technical Regulator audit). I took it on myself to get professionally laser cut labels to replace the dodgy label maker/hand written and non-compliant language. RBZ3D was easy to use to make all the labels I need, shipped quick enough, and now the labels look so much better. Would definitely recommend and use again.”
On the escutcheon
The boards we label in Melbourne.
Every set is engraved to your schedule and sorted so it can be fitted in order, one board or a whole site.
MCC bucket & starter labels
Motor starter identification, bucket numbering, and drive references for plants through Dandenong, Laverton, and the western industrial belt, sized to be read from the switchroom aisle.
Plant switchroom boards
Incomer and tie identification, isolator labels, and door-mounted legend cards for process switchrooms where the board feeds equipment nobody can identify by breaker number alone.
Commercial DB schedules
Full circuit schedules for CBD and metro fit-outs: engraved circuit IDs, main switch labels, and RCD identification for boards handed over to a building manager who will never open a drawing.
Non-standard escutcheon sizes
Older Melbourne boards rarely take a stock label. Send the cutout dimensions or the old label itself and the replacement is engraved to match, holes and all.
Switchboard builder runs
OEM label sets engraved to your schedule with consistent sizing across the production run, supplied loose or on backing tape, ready to go straight onto escutcheons.
Real boards · real labels
What ends up on the board.
Circuit IDs, board tags, isolator labels, door signage, legend plates. Click any photo to enlarge.
From schedule to escutcheon
Send the schedule. Fit the labels.
Type the schedule, confirm the artwork, and the set is engraved and on its way to Melbourne: one tracked consignment, sorted by board.
1 · Schedule
One row per label
Paste the circuit list into the bulk tool, or send a photo of the board and we transcribe it.
2 · Production
1–3 business days
Engraved to order in Townsville, QLD once the artwork is confirmed.
3 · Tracked post
3–6 business days
typically, to Melbourne after dispatch, tracking number the moment it leaves the bench. Australia Post timeframes are indicative, not guaranteed.
Or · Express
2–3 business days
typically, when a handover, inspection, or shutdown date is fixed. Still Australia Post's network, so it can run long in peak periods.
Or · Priority Air
1–2 business days
StarTrack Premium: the most consistent lane we run to Melbourne. It is the one we reach for when the board is waiting on the labels, though no courier can promise a date.
Standards framing
Straight about what a label can claim.
In its audits of the Solar Victoria heating and cooling program, Energy Safe Victoria lists circuit breakers not labelled to show what they supply as a common defect, under AS/NZS 3000:2018 clause 2.10.5.2. Its test is whether a person can “readily identify the equipment supplied and the corresponding circuit protective devices”. Engraved traffolyte has the text cut into the material rather than printed onto it. There is no ink to fade and no film to lift.
What we will not tell you
- ·That the material is “certified” or “approved”. None of the regulator pages we have read approves a label material. A supplier using those words should be able to show you the document.
- ·That a label makes an installation compliant. Compliance is the installation, the documentation and the person who signed it. A label is one durable part of that.
- ·What your board should say. Josh holds an electrical licence and is happy to talk it through, but the wording call belongs to whoever is responsible for the job.
Common questions
Quick answers.
Do you make MCC and motor starter labels for Melbourne plants?
Yes. Bucket numbers, starter and drive identification, isolator labels, and door legend plates. Send the MCC schedule as a list, one row per label, and the whole line-up is priced instantly in the bulk tool and engraved as one run so the sizing is identical across the board.
Can you engrave labels to fit an older board's escutcheon cutouts?
Yes. Custom sizes cost the same as standard sizes. The price is worked from the area, not from a size menu. Measure the cutout or the existing label, or post us the old one, and the replacement comes back to those dimensions with the mounting holes where you need them.
What does AS/NZS 3000 require on a Melbourne switchboard?
Energy Safe Victoria's defect guidance names AS/NZS 3000:2018 clause 2.10.5.2: circuit breakers labelled to show what they supply. Its test is whether a person can readily identify the equipment supplied and the corresponding circuit protective devices. Engraved traffolyte has the text cut into the material rather than printed onto it. What the label says is the call of the person doing the job.
How do I send a whole board schedule?
Use the bulk tool in the Label Designer: one row per label, paste or type the schedule, and every label is priced as you go. If you would rather not type it, send a photo of the board or a copy of the schedule through Quick Quote and it comes back priced within one business day.
Who makes them, and where?
Josh, a licensed electrician, on one CO2 laser in Townsville, Queensland. Every Melbourne order is engraved to order here, checked, and shipped tracked. No outsourcing, no reselling somebody else's labels.
Melbourne board to label?
Send the board schedule.
A photo of the open board, a circuit schedule, or a typed list. Send it through and it comes back priced within one business day.
Ready when the board is
Label the Melbourne board properly.
One replacement circuit label or every board on the site, same engraving, same week.
or call Josh directly on 0432 736 559