Sydney metro · Western Sydney · Wollongong · Central Coast · Newcastle
Switchboard labels
for
Sydney boards.
A switchboard label identifies a circuit, main switch, or supply on a board — AS/NZS 3000 clause 2.8 requires that identification to be permanent and legible for the life of the installation. RBZ 3D engraves switchboard label sets to order in Townsville, Queensland and delivers them to Sydney and greater New South Wales in 3–5 business days after 1–3 business days production.
Circuit identification, main switch and isolator labels, RCD tags, board schedules and legend cards — engraved by a licensed electrician, priced online, and shipped tracked to Sydney in 3–5 business days.
Order today — Express by Tue 18 Aug · Priority Air by Mon 17 Aug
- Customer rating
- 5.0 from 15 reviews
- Avg $3.38
- Avg $3.38 / label
- Made by a
- Made by a licensed sparky
- 3–5
- 3–5 days to Sydney
- 1–3 day
- 1–3 day production
- No minimum
- No minimum order
Real prices
See the price before you commit.
No quote, no waiting. Common sizes priced per label below — cheaper per unit in bulk, and there’s no minimum order.
Build yours & see your price40 × 12 mm
Circuit ID label
$2.69
per label
Switchboard circuit labels
100 × 50 mm
Main switch label
$6.81
per label
The standard switchboard size
150 × 50 mm
Warning / PV sign
$9.09
per label
Solar & safety signage
Order today →
Standard — FREE over $40 / $8.50
Fri 14 Aug – Fri 21 Aug
Express — Express $15
Thu 13 Aug – Tue 18 Aug
Priority Air — Priority Air $35
Thu 13 Aug – Mon 17 Aug
Board work in Sydney
Tenancy boards, base-building MSBs, and data hall distribution.
Most Sydney switchboard labelling is refit work rather than new work. A tenancy changes hands, the floor DB gets restacked, circuits move — and the schedule on the inside of the door describes a board that no longer exists. What we engrave for Sydney is overwhelmingly replacement: a fresh circuit schedule, a new run of breaker labels, and a board ID tag that matches the base-building convention instead of whatever the last contractor wrote in marker.
The other half is high-rise base-building and data hall work, where the same naming convention has to survive across dozens of boards and several contractors. Send the convention with the schedule — DB-L12-A, MSB-01, whatever the drawings use — and every board on the project comes off the laser in the same font, the same size, and the same layout.
See the full switchboard label range →What customers are saying
See all →“As soon as I had put my order in, Josh was on the phone to me to adjust a few things to make sure it was 100% right. Couldn’t ask for better service and transparency from designing all the way to picking up the labels.”
“Great service and communication”
“Hi recently had solar panels installed, but the installer did a messy job on my switchboard. The moved all the switches around, but didn't move any of the existing labels, and the new labels were just label maker and the terminology was non complaint (failed and Office of the Technical Regulator audit). I took it on myself to get professionally laser cut labels to replace the dodgy label maker/hand written and non-compliant language. RBZ3D was easy to use to make all the labels I need, shipped quick enough, and now the labels look so much better. Would definitely recommend and use again.”
“Treff labels supplied as requested, great job thank you”
On the escutcheon
The boards we label in Sydney.
Every set is engraved to your schedule and sorted so it can be fitted in order — one board or a whole site.
Tenancy distribution boards
Breaker-by-breaker circuit ID for CBD, North Sydney, and Parramatta fit-outs, plus a replacement legend card for the door and a board ID tag that matches the base-building schedule.
Base-building MSBs & submains
Main switch, submain, and metering panel identification for towers and mixed-use developments — one naming standard held across every board on the job.
Data hall & UPS boards
A/B feed identification, UPS and generator changeover labels, and rack circuit references. Engraved laminate is non-conductive and stays legible for the life of the installation.
Panel builder label runs
Escutcheon labels and complete circuit schedules for Western Sydney panel shops — supplied loose or with adhesive backing, sized to your cutouts, consistent run after run.
Relabelling on upgrades
Board upgrades and RCD retrofits leave the old schedule wrong and the old labels the wrong width. Send a photo of the board as-found with the new circuit list and the replacement set comes back to the existing label sizes.
Real boards · real labels
What ends up on the board.
Circuit IDs, board tags, isolator labels, door signage, legend plates. Click any photo to enlarge.
From schedule to escutcheon
Send the schedule. Fit the labels.
Type the schedule, confirm the artwork, and the set is engraved and on its way to Sydney — one tracked consignment, sorted by board.
1 · Schedule
One row per label
Paste the circuit list into the bulk tool, or send a photo of the board and we transcribe it.
2 · Production
1–3 business days
Engraved to order in Townsville, QLD once the artwork is confirmed.
3 · Tracked post
3–5 business days
typically, to Sydney after dispatch — tracking number the moment it leaves the bench. Australia Post timeframes are indicative, not guaranteed.
Or · Express
2–3 business days
typically, when a handover, inspection, or shutdown date is fixed. Still Australia Post's network, so it can run long in peak periods.
Or · Priority Air
1–2 business days
StarTrack Premium — the most consistent lane we run to Sydney. It is the one we reach for when the board is waiting on the labels, though no courier can promise a date.
Standards framing
Straight about what a label can claim.
AS/NZS 3000 clause 2.8 asks that switchboard labelling be permanent, legible for the life of the installation, and clear about which circuit and equipment each label identifies. Engraved traffolyte meets the durability and permanence requirements of that clause, because the text is cut into the material rather than printed onto it — there is no ink to fade and no film to lift.
Solar and battery — the one place testing is required
Solar goes further than AS/NZS 3000. The Clean Energy Council’s Advice on Labelling (Version 2, June 2023) requires any label exposed to direct sunlight to be UV resistant, demonstrated by passing IEC 60068-2-5:2018 — a 720-hour accelerated weathering test.
Section 3.1.1 of that document carries an exception: it does not apply to markings that are physically engraved, embossed or etched with durable markings. Engraving is exempt because the marking is the material — there is no printed surface to fade.
The practical difference: a printed or vinyl label in direct sun needs that test report to show it meets the requirement. An engraved one doesn’t. If your supplier can’t produce the report, you can’t demonstrate the label complies.
Read the full breakdown → CER photo evidence and the CEC labelling guideWhat we will not tell you
- ·That the material is “certified” or “approved”. There is no certification scheme for engraving laminate and no inspector approval scheme for labels. A supplier using those words is selling you a word.
- ·That a label makes an installation compliant. Compliance is the installation, the documentation and the person who signed it — a label is one durable part of that.
- ·What your board should say. Josh holds an electrical licence and is happy to talk it through, but the wording call belongs to whoever is responsible for the job.
Common questions
Quick answers.
Can you label a whole Sydney tenancy board from a photo?
Yes — that is the most common Sydney job. Send a photo of the open board with the breakers visible plus the circuit list, and we engrave a full set sized to the existing label positions so the new labels sit where the old ones came off. Text, sizes, and colours all come back for approval before anything is cut.
How do you keep board IDs consistent across a multi-board Sydney project?
Send the naming convention from the drawings once — DB-L12-A, MSB-01, or whatever the project uses — and it is engraved the same way for every board on the job, including boards ordered weeks apart. Reorders pull up the previous job so board forty matches board one.
What does AS/NZS 3000 require on a Sydney switchboard?
Clause 2.8 of the Wiring Rules deals with identification: switchboard labelling has to be permanent, legible for the life of the installation, and clear about which circuit or equipment each label refers to. Engraved traffolyte satisfies all three by construction — the text is cut into the material rather than printed onto it, so there is nothing to fade, peel, or rub away.
How do I send a whole board schedule?
Use the bulk tool in the Label Designer — one row per label, paste or type the schedule, and every label is priced as you go. If you would rather not type it, send a photo of the board or a copy of the schedule through Quick Quote and it comes back priced within one business day.
Who makes them, and where?
Josh, a licensed electrician, on one CO2 laser in Townsville, Queensland. Every Sydney order is engraved to order here, checked, and shipped tracked — no outsourcing, no reselling somebody else's labels.
Sydney board to label?
Send the board schedule.
A photo of the open board, a circuit schedule, or a typed list — send it through and it comes back priced within one business day.
Ready when the board is
Label the Sydney board properly.
One replacement circuit label or every board on the site — same engraving, same week.
or call Josh directly on 0432 736 559